You have no items in your shopping cart.
Product Description
The CM-414 is a large dual diaphragm, 3-pattern fet microphone based on the famous AKG 414 design and specifications.
The Advanced Audio CM-414 features a very accurate yet smooth 34mm capsule with 6 micron thick German mylar diaphragms. This capsule has a frequency response within 2 db of the AKG C12 capsules used in the C12 and early 414 microphones. This is the same capsule used in our popular CM12.
The CM414 uses a 2-stage class “A” similar to the original 414. The fet is buffered by a discrete transistor before it is coupled into the output transformer which is superior to the Neumann U87 single fet circuit.
The 414 has a very smooth response up to 8khz where the response starts to rise up about 4db at 15khz adding a “airy” quality to the sound.
Our CM414 has a -10db pad, LF roll-off and 3-patterns switch on the body.
Specifications:
• 1.07” dual diaphragm
• 6 micron German Mylar
• 25hz to 20khz + or – 3db
• 3-selectable pick-up patterns
• -18db(A weight) noise
• <200 ohm Impedance
• .5% distortion @ 125db & 135db with -10db pad
• Class “A” discrete circuit
• 48v phantom power required
• shock-mount
• Aluminum road case
The Advanced Audio CM-414 features a very accurate yet smooth 34mm capsule with 6 micron thick German mylar diaphragms. This capsule has a frequency response within 2 db of the AKG C12 capsules used in the C12 and early 414 microphones. This is the same capsule used in our popular CM12.
The CM414 uses a 2-stage class “A” similar to the original 414. The fet is buffered by a discrete transistor before it is coupled into the output transformer which is superior to the Neumann U87 single fet circuit.
The 414 has a very smooth response up to 8khz where the response starts to rise up about 4db at 15khz adding a “airy” quality to the sound.
Our CM414 has a -10db pad, LF roll-off and 3-patterns switch on the body.
Specifications:
• 1.07” dual diaphragm
• 6 micron German Mylar
• 25hz to 20khz + or – 3db
• 3-selectable pick-up patterns
• -18db(A weight) noise
• <200 ohm Impedance
• .5% distortion @ 125db & 135db with -10db pad
• Class “A” discrete circuit
• 48v phantom power required
• shock-mount
• Aluminum road case
Additional Information
| Manufacturer | Advanced Audio |
